Climber ZW47250 Electric Stair Lift

Climber ZW47250 – an electric stair climber with a 250 kg capacity and intelligent angle control

Climber ZW47250 – an electric stair climber designed to transport heavy loads weighing up to 250 kg. This model is intended for moving machinery, equipment, boxes, and other heavy items between floors. A reinforced chassis and a 500-watt electric motor ensure stable operation under load, while low noise levels allow the lift to be used in residential buildings, offices, and other facilities.

A key feature of the ZW47250 is the Smart Angle Recognition system, which detects the lift’s angle of inclination. The model is also equipped with a patented aluminum alloy drive design that combines durability, efficient heat dissipation, and ease of maintenance. The electric motor control system ensures stable power transmission and helps reduce noise during operation.

Key Benefits

• Lifting capacity of up to 250 kg for handling heavy machinery and equipment.
• Reinforced chassis for stable operation under heavy loads.
• A 48 V electric motor with a power output of 500 W.
• Smart Angle Recognition system for monitoring the lift’s angle of inclination.
• Patented aluminum alloy drive design.
• Efficient heat dissipation from the drive mechanism.
• Two speed modes: 22 and 30 steps per minute.
• Noise level below 70 dB for more comfortable indoor operation.
• Foldable design for transport and storage.
• IP54 protection rating.

Suitable for

• Lifting and lowering loads weighing up to 250 kg up and down stairs.
• Moving heavy household and professional equipment.
• Transporting equipment between floors.
• Delivering heavy loads in residential and commercial buildings.
• Supporting the work of service, installation, and logistics teams.
• Use in areas where relatively low equipment noise levels are important.

The Climber ZW47250 is powered by a 48 V, 10 Ah lithium-ion battery weighing 3.2 kg. A full charge takes about 2.5 hours, and the range is approximately 1,128–1,353 steps. Two speed modes are available for different operating conditions: 22 steps per minute in slow mode and 30 steps per minute in fast mode. The stair climber is designed for steps up to 210 mm high and over 250 mm deep.

Technical Specifications

• Model: Climber ZW47250
• Type: Electric stair climber for heavy loads
• Load capacity: 250 kg
• Weight without battery: 30 kg
• Battery: lithium, 48 V, 10 Ah
• Battery weight: 3.2 kg
• Charging time: approximately 2.5 hours
• Range: approximately 1,128–1,353 steps
• Electric motor: 48 V, 500 W
• Speed in slow mode: 22 steps/min
• Speed in fast mode: 30 steps/min
• Position control: Smart Angle Recognition
• Step requirements: height up to 210 mm, depth over 250 mm
• Noise level: less than 70 dB
• Protection rating: IP54
• Load platform dimensions: 386 × 316 mm
• Dimensions when folded: 530 × 320 × 1235 mm
• Dimensions in operating position: 530 × 620 × 1,555 mm

The Climber ZW47250 is designed for the regular transport of heavy loads up and down stairs, with an emphasis on stable and quiet operation. A reinforced chassis, a 500-watt motor, and an angle-sensing system make this model suitable for professional delivery, logistics, and service operations.